Spectra Precision LL500 with HL700 Receiver

Spectra Precision LL500 with HL700 Receiver

LL500 is designed for measurements at longer distances. Accurate, stable and reliable! 
It has an accuracy of up to 1.5 mm at 30 M and has a working range of up to 500 M.

• Rangeup to 800M with laser receiver
• Accuracy1.5mm at 30M
• 360-degree reference
• IP66dustproof and powerful water jet resistant

Product description HL 700

Digital laser receiver for use against rotating lasers. Anti – Strobe sensor prevents other lights (flash lights) from interfering with the receiver. Display for reading on both front/back Mm display with numbers in display. Durable, extra protected by rubber casing (fall tested 3 m) Automatic shutdown (in case of non-contact with laser) 30 min.

The HL700 laser receiver has a digital elevation readout that provides a numerical display of +/- 50mm, The reading is displayed on the large front and rear LCD screens and shows exactly how far the elevation is from high quality. Accurate measurements can be taken without moving the bar clamp, saving time and increasing productivity. Selectable units of measurement can be displayed according to your application - mm, cm, ft, i or fraction.

The HL700 laser receiver has built-in display lighting (selectable) which lights up the display when the laser beam hits the receiver or if you press one of the buttons. It then lights up for about 5 seconds and then closes
to save the batteries.

Specification:

• Digital height readout - not only will high or low arrows be displayed, but exact distance from grade is displayed numerically, eliminating the need to get "high quality" to take measurements. Large 12.7 cm reception height acquires the beam quickly and makes it easy to stay in the beam
• The anti-strobe sensor stops construction searchlights from tuning the receiver and makes it easier to identify true laser beam signals. Simultaneously increasing the LED signal in low light levels and over a longer range for easier reading in poor light conditions
• New CAPTURE function removes and keeps a measurement when the screen is hard to see. With multiple deadband settings, customization can meet all your workplace requirements
• Dust and weatherproof housing can withstand a drop of up to 3m onto concrete for reduced downtime
• Two clamping positions for cutting / filling or excavation. Digging mode puts more reception height and height information above grade for higher utilization when digging and staking