Studs, Nails, Screws and Washers

Pin / Screw M10x10mm Replacement screw. For closing and closing expanding screw.

Brass bolt with smooth head This bolt is manufactured in corrosion-resistant copper coating.  Can be cast into concrete, plugged and glued Dri...

Wall bolt with M8, BROWN Wall bolt for height and position control. Also called expander and locking screw. Made in brass with brown plastic...

Brofix stud in stainless steel with M10 thread at the end. 10x100mm

Balance stud brass 10x100 with rounded top Material: brass Design: smooth surface, rounded top Length: 100mm Diameter: 10mm

Plug for MS Dub Used together with MS studs in the 11H series Drill diameter: 12 mm Drill depth: 45 mm Material: high-quality polyamide Fits...

Wall bolt head, brass with Allen screw M8x22

Convergence measurement bolt with steel protective ring in case of explosions Adapted for construction sites with blasting. This model of conve...

Brass bolt with center hole 35mm Material: brass Head: Ø20mm Length: 35mm Drill diameter: Ø10mm Drilled center hole

Post mount with M10 mount 159-163mm Used to attach prisms to lampposts, downpipes, fence posts, road signs, etc. Remove the rubber covering to ach...

Post mount with M10 mount 108-114mm Used to attach prisms to lampposts, downpipes, fence posts, road signs, etc. Remove the rubber covering to ach...

Adapter M8 to G3/8" in stainless steel The adapter has an M8 male thread on one end and a G3/8" male OD 16.6mm thread on the other end (so not a...

Sormat hammer LT+10 Tool for safe and quick installation of impact anchors. Always use the special original tools LT + or LT + PRO for mounting...

Sormat LT+8 hammer Tool for safe and quick installation of impact anchors. ALWAYS use the special original tools LT + or LT + PRO for installin...

Brass expander Sormat MSA, 30mm with internal M8 thread MSA- All-brass mounting with internal metric thread. Brass expanders are intended for u...

Sormat LT+10 PRO impact mandrel with impact protection Tool for safe and quick installation of impact anchors. Always use the special original ...

Impact anchor Sormat M8 LAH Acid-resistant, without collar, 30mm Acid-fast Designation: LAH Thread diameter (M): M8 Drill diameter: 10 mm Le...

Strike anchor Sormat LAL+ M10 with collar Designation: LAL+ Thread diameter (M): M10 Drill diameter: 12 mm Length: 40 mm Surface treatment: ...

Strike anchor Sormat LAL+ M8 with collar IMPACT ANCHOR SORMAT LAL+ M8 FZB WITH COLLAR 100/FP ETA-13/0442 Brand: Sormat Designation: LAL...

Lumable wall bracket with M8 thread With internal M8 thread for mounting, for example, Polyfix stud (2110-10) or a Leica adapter (8911) The spe...

Sormat LT+8 PRO impact mandrel with impact protection Tool for safe and quick installation of impact anchors. Always use the special original t...

Brass expander Sormat MSA, 34mm with M10 internal thread MSA- All-brass mounting with internal metric thread. Brass expanders are intended for ...

Impact anchor Sormat M10, LAH Acid proof A4, without collar, 40mm Acid-fast Designation: LAH Thread diameter (M): M10 Drill diameter: 12 mm ...

Convergence measurement bolt with Leica mount 12mm Leica mount Length: 250mm Diameter (widest part): 22mm Material: galvanized steel Smooth ...