Marker for reference line

Reference Line Marker (RS95 and RS96) was specially developed for setting out work on hanger or on the floor plate. Accurate measurement of the survey point on the gallows or the floor slab often causes major problems, especially in the "final phase" with the last 5-10 cm. The work is very time consuming due to the constant side to side, back and forth with the prism rod and the prism rod must always be exactly vertical. The RS95 or the foldable RS96 is placed on the ground and measuring tape can use the measuring scales to quickly and accurately reproduce and transmit the inspector's instructions.

• For additions on the floor slab - especially the last 5-10 cm can be measured quickly and accurately
• The surveyor's dimension data can be accurately transferred to the floor plate
• There is no need for precise plumbing of the prism pole
• Orientation scale for left and right - the number 10 corresponds to the axis
• Back and forward orientation scales
• Foldable: fits easily in your pocket (RS96 + RS97 only)
• RS95, RS96: Ranges are device dependent and may be adversely affected by weather and environmental conditions.

The following heights must be taken into account during the measurements:
RS95: From the crosshairs of the reflective target to the floor plate 30mm
RS96: From the reflective target's crosshairs to the floor plate 20mm 
RS97:From the cross hairs on the non-reflective target to the floor plate 20mm